If the amount of chipping, chalking, and peeling paint is above lead based paint de minimus what must be done?

• A. Remove lead-based paint and replace surface
• B. Lead-based paint safe work practices must be implemented
• C. Call a licensed contractor for all cases
• D. Ignore if below threshold

Answer: (B)

When chipping, chalking, and peeling paint exceed the lead-based paint de minimis threshold, the priority is to implement lead-safe work practices to prevent lead exposure. This means setting up containment to keep dust from spreading, using wet methods rather than dry scraping or sanding, cleaning with a HEPA-filtered vacuum and proper methods, and following safe waste disposal procedures. Worker training and appropriate protective equipment are often part of these practices as well. The emphasis is on reducing and controlling lead dust during work, not automatically overhauling the entire surface, which would depend on project specifics and regulations. Ignoring the deterioration would not meet safety and regulatory expectations.